Disinfection cleaner mikrozid universal liquid, 5 litres

Quick disinfection of non-invasive medical devices and surfaces with a low alcohol content.

The product is suitable for the disinfection of medical devices and other surfaces. Our versatile rapid disinfection is also suitable for disinfecting sensitive communication devices. Smartphones and tablets are among the most common hand contact surfaces. These can be processed safely with mikrozid® universal without damaging the materials.

Apply undiluted to the surface, wipe and leave to take effect.
Ensure complete wetting and keep the surface moist throughout the exposure time . Make sure that all visible dirt is removed before disinfection. Spray the surface from a distance of approx. 30 cm (approx. 40 ml/m²) and allow to dry. In the case of adenovirus and mycobacterium tuberculosis, keep the area moist throughout the exposure time. Intended for use by professionals only. Serious incidents related to the product must be reported to the manufacturer and the competent authority. Not suitable for the final disinfection of semi-critical and critical medical products! The product can be used without gloves, provided that infection control and occupational safety allow this.

100 g solution contains the following active ingredients: 17.4 g propan-2-ol, 12.6 g ethanol (94% w/w) Labeling according to VO (EG) No. 648/2004: < 5% anionic surfactants 1
Density:approx. 0.95 g/cm3
Viscosity, dynamic:No data available
Form:liquid
pH:3 - 3.6 / 100%

Use disinfectants carefully. Always read the label and product information before use.
The product has very good material compatibility with metals and plastics. Keep away from heat and sources of ignition. Further information is available on request. The shelf life of the opened container can be found on the packaging.

The current safety data sheet is available for download at www.brand.de.