Insert 6.0 mm

DURAN® Insert for GL 14 Screw Cap, inner diameter 6.0 mm (~1/4 inch), silicone/PTFE (accessory for GL 45 screw connection cap system and stirred bottle reactor system) The GL 14 caps and tubing inserts allow the DURAN® GL 45 2/3 port tubing connection caps or GL 45 / GLS 80® Stirred Bottle Reactors to be used with four different rigid or semi-rigid tubing outer diameters (1.6, 3.0, 3.2, or 6.0 mm). The different sized inserts form a tight seal around the pass-through tubing when used with the blue GL 14 tubing cap. Sterile pressure equalisation is possible through use of 0.2 ?m syringe filter set. Unused ports can be sealed off with a red PBT GL 14 screw cap. Features and Benefits: Manufactured from PP, PTFE, silicone Accessories designed for use with the DURAN® GL 45 2/3 port tubing connection caps or GL 45 / GLS 80® Stirred Bottle Reactor caps Safe and secure liquid transfer into or out of laboratory bottles Four inserts are suitable for rigid or semi-rigid tubing with a range of outer diameters: 1.6, 3.0, 3.2 or 6.0 mm Open-topped blue PP GL 14 pass-through tubing cap for use with the inserts Closed-top red PBT GL 14 cap for sealing unused ports Sterile pressure equilisation is possible with pressure compensation set Application: Sterile fluid transfer in and out of GL 45 lab bottles, Gas transfer in and out of GL 45 lab bottles, Fluid transfer between GL 45 lab bottles, Supply of reagents to instruments, Bioreactor supply